WINDOW DECAL APPLICATION INSTRUCTIONS
The decals are cut to be applied to glass on the outside.
1. Clean the area where the decals will be applied with a soft cloth dampened with alcohol. This will remove any wax, oil or dust particles that will prevent the decal from sticking.
2. Carefully peel the tape and decal away from the paper backing. Hold the decal in position and stick the top or one side holding the other side up away from the surface. Rub the entire area beginning at the top or side that is on the surface and rub firmly from one side to the other using your fingertips or the sharp edge of a credit card. The decals have a pressure sensitive adhesive the harder you rub the harder it sticks.
3. Remove the application tape by pulling gently in a downward position. If a part of the decal starts to come up away from the surface rub it back down while the tape is still on, then proceed to remove the tape.
4. If you get air bubbles in the decal take a pin or needle and puncture the bubble to release the air.
Note: The decals will not adhere to a surface that has been waxed. Remove all wax and residue with a cloth dampened with rubbing alcohol or denatured alcohol before application. After the decals have been applied, the surface can be waxed over. The wax will not damage the decal, but will prevent it from sticking.
Click to Return to Home Page
Window Decal
